|
| |
| DISINTEGRATION TEST MACHINE |
The instrument is designed for accurate estimation of disintegration time of tablets/capsules. It is assembled in painted sheet metal cabinet with chemical resistant epoxy coating, fitted with superior quality constant speed sturdy motor. The guide discs and strokes are confirming to pharmacopoeial standards.
OPTIONAL FEATURES :
1) Digital Timer with Time Hold Facility.
2) Water bath for maintaining temperature.
3) Digital Temperature Controller with Water bath.
SPECIFICATIONS :
| Displacement |
: |
55mm |
| RPM |
: |
30 |
| Drive |
: |
1/8 HP |
| Heater |
: |
125 watt. |
| Power |
: |
AC/230 volt Single Phase. |
| |
|
|
|
| |
DIGITAL DISSOLUTION TEST APPARATUS (SINGLE STAGE)
|
 |
DIGITAL DISSOLUTION TEST APPARATUS (SIX STAGE) |
|
| DIGITAL DISSOLUTION TEST APPARATUS |
The Digital Dissulation Rate Test Appratus is designed & manufactured for pharmaceutical industry in Quality Control & R & D to determine compliance with the dissolution requirements of the Tablet & Capsule as per USP/BP/IP standard.
The unit is equipped with Digital setting of RPM which can be controlled from 25 to 150 RPM.
The Digital Temp. Controller/Indicator is normally set at 37ºC with digital display. It can be adjusted for other setting with an accuracy of better than ± 0.5ºC.
The acrylic water bath is duly fitted with pump which recirculates the water thus maintaining homogeneous temperature. The digital timer can be set ranging from 1 to 999 minutes add it "BEEPS" at the end of the set time.
The equipment is duly fitted with motorized lifting to facilitate easy operation of the stirrers' assembly.
SALIENT FEATURES:
| SPEED CONTROL |
TEMP. INDICATOR/CONTROLLER |
| Speed range: 25-150 rpm |
Temp. range 30ºC to 50ºC |
| Display : 3 digit LED |
Display : 3 digit LED |
| Accuracy: ± 1RPM |
Accuracy : ± 0.5ºC |
| |
Resolution : 0.1ºC |
| |
Sensor : RTD |
| DIGITAL TIMER/ALARM |
WATER BATH SIZE |
| Display : 3 digit LED |
900mm(W)x200mm(D)x200mm(H)
Made of 10mm thick acrylic. |
| Setting Range :1 to 999 minutes,in steps of 1 min |
| Accuracy : ± 0.1% |
POWER |
| Mode/Setting : "Finger-tip" |
220V 50Hz 1.0 KW |
| Alarm : Peizo beeper |
Heater : 500 Watts |
|
|
| |
|
|
TABLET FRIABILITY TEST APPARATUS (SINGLE DRUM)
|
|
|
| TABLET FRIABILITY TEST APPARATUS (SINGLE DRUM) |
The apparatus is designed to determine the abrasion rate and impact hardness of tablets. Two transparent acrylic drums rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant epoxy coating..
SPECIAL FEATURES: Realistic abrasion rate is obtained by pre-set revolutions through LED as compared to time setting, where voltage fluctuation may change number of revolution in pre-set time.
SPECIFICATIONS:
| Drim Diameter |
: |
285mm |
| Tablet Fall Distance |
: |
140mm |
| Drive |
: |
1/8 HP |
| Power Phase. |
: |
AC/230 volt Single |
|
|
TABLET FRIABILITY TEST APPARATUS (DOUBLE DRUM) |
|
| |
|
| |
|
|
| BULK DENSITY APPRATUS |
Digital Automatic Tap Density Test Apparatus is designed to meet the requirements of USP Standards It can hold two cylinders, capacity: 100 ml. The mechanism provides simultaneously rotating and tapping motion to the cylinders for packing the sample under test evenly and uniformly together.
The user has to select the No. of stokes in the counter & after selecting just press start , it will start the stokes & the display shows the No. of strokes.
|
|
| |
|
| |
| TABLET HARDNESS TESTER (MONSANTO TYPE) |
|
|
| |
|
|
TABLET HARDNESS TESTER ( PHYZER TYPE ) |
A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip.
The instrument offers accurate and reproducible result much faster other conventional hardness tester.
SPECIFICATIONS :
ACCURACY : + 0.2 kg
LEAST COUNT : 0.2 kg
SAFE TESTING FORCE : 20 kg
MAXIMUM TABLET DIAMETER : 25 mm |
TABLET HARDNESS TESTER
( PHYZER TYPE ) |
|
|
MELTING POINT APPRATUS
with thermometer pocket. Consists of a metallic heating block made to receive three capillaries and a thermometer. The block is heated with superior quality element. A focusable lens gives a view of the capillaries which are illuminated by a shadow less lamp. A heat regulator controls the heat. The whole unit is housed in a cast metal. Control panel, heat regulator and on/off switch. |
| |
|
|
